Golf Driving Range Anti Ball Plugging Mesh

Golf ball anti-plugging mesh is a strong blackor green high density polyethylene ground reinforcement mesh for golf driving range surfaces. The plastic reinforcement mesh is used on golf driving ranges to prevent golf balls from plugging into the driving range's fairway surface in wet conditions. The plugging of the golf balls is a major problem as balls are missed by the collection machines. These golf balls are either lost into the surface or manual collection is required, which is an expensive and time consuming operation.

Golf Ball Anti-plugging stabilisation mesh is simply laid onto the existing grass surface and pinned, ensuring that the mesh is flat against the surface. If laid in the growing season, the grass will grow quickly through the mesh apertures and will disappear from view, whilst stabilising the surface and preventing any further plugging of the golf balls.

Easy to install
Grass grows through the mesh apertures
Rot resistant
The range can be used immediately after installation

Golf ball anti-plugging mesh is supplied on 2m wide rolls in two mesh apertures and is available in black or green. The mesh should be overlapped by 100mm on installation to ensure a full coverage is applied.

Within a few weeks the plastic mesh will disappear from view as the grass grows through the mesh holes. The result will be that golf balls can be collected easily, with less bulls plugged and fewer lost balls.

Product Specification :

Size	Mesh Aperture	Colour	Weight	Material	Tensile Strength	Part No.
2mx30m	7mm x 7mm	Black	720g/m²	HDPE (100 % recycled)	8kN/m (MD)	009848
2mx30m	25mm x 29mm	Green	550g/m²	HDPE (100 % recycled)	5.9kN/m (MD)	049202